Compliance Design Evaluation Engineer (Senior)

About the role

Analog Devices is hiring a senior Compliance Design Evaluation Engineer in Glasnevin, supporting product compliance for the Data Center and Energy business unit. You will run compliance evaluations, document results and work with system design teams and external certification bodies so products meet safety, mechanical and EMC requirements.

Key responsibilities

• Execute laboratory test plans and procedures for safety, EMC, mechanical and/or environmental standards.
• Generate detailed test reports covering laboratory setups and device-under-test configurations to ensure repeatability across development cycles and between internal and external labs.
• Support development of fixtures, jigs, lab interface boards and software tools for laboratory automation and DUT control.
• Coordinate logistics with internal test labs, engineering teams and certification bodies to optimise scheduling of safety, EMC and robustness testing.
• Support lab debug activities, including soldering and rework, adding recommended filters or components, reworking assemblies and making board-level modifications.
• Review schematics, PCB layout and mechanical designs to verify alignment with safety clauses, EMC design rules and industry best practice.

Required profile

• Demonstrated experience performing product compliance testing to IEC 61010-1 and/or the IEC 61000 EMC series (or equivalent standards).
• Experience working with external certification bodies and supporting certification test campaigns.
• Ability to write clear, repeatable test procedures and high-quality test reports with strong attention to detail.
• Hands-on electronics lab skills, including soldering/rework and component selection and procurement.

Preferred qualifications

• Experience designing or reviewing schematics and PCB layout, including EMC filtering, grounding and layout techniques.
• Working knowledge of safety design best practices (creepage/clearance, insulation systems, protective earth/grounding) mapped to compliance clauses.
• Experience with mechanical and environmental testing and design considerations.
• Experience with power monitoring or power instrumentation projects.

Programming or test automation experience in Python and/or LabVIEW is required. The role involves about 10% travel, is a day shift and requires export licensing review for non-US citizens and permanent residents.